Description HAPS free, <1.0 VOC emitted (catalyzed),two-component high performance polyurethane coatings. All specifications are given on force - dried samples. Advantages

• Meets the Federal HAPS rule for wood finishes as packaged* [HAPS free]
• Low VOC at <1.0lbs/gal
• Good gloss and color retention
• Product is designed for interior use.
• Good performance when used exterior.
• Clear and Blend monochromatics
• Can be used on metal, plastic, or wood with the appropriate primer, basecoat, or pretreatment.
• Designed to meet AAMA 623 and 613
• Free of lead and chromate hazards
• Can be blended with up to 8 oz/gal Kem Aqua colorants or Solar Reflective Colorants.

Air Quality Data: Non-photochemically reactive Varies by color and mixing ratio used please check MSDS for specific colors. White (10 to 1) Volatile Organic Compounds (VOC) as packaged, maximum 1.04 lb/gal, 125 g/L Volatile Organic Emissions as packaged, maximum .44 lb/gal, 53 g/L Hazardous Air Pollutants (HAPS) as packaged, is HAPS free. An Environmental Data Sheet is available from your local Sherwin-Williams facility.

Wood (Interior): Must be clean, dry, and finish sanded. Use of Sherwood interior millwork primer is suggested for priming. Substrate should be free of grease, oil, dirt,fingerprints, and any contamination to ensure optimum adhesion and coating performance properties. Moisture content of wood should be 6 to 8%. Wood (Exterior) – Must be clean, dry, and finish sanded. Use of exterior alkyd primer or Sherwood 90 day exterior primer is recommended for priming. Due to the nature of wood and use of various primers these products should be thoroughly tested for exterior performance. Testing: Due to the wide variety of substrates, surface preparation methods, application methods, and environments, the customer should test the complete system for adhesion and compatibility prior to full scale application.

Product Limitations: • Do not store material that has been catalyzed. Pressure can build in closed containers. Use all catalyzed material. • Do not freeze. Store between 45 – 90F. • Potlife maybe different for each color or clear • Product is designed for interior use. • Product has good performance when used exterior. Please consult your SW • Representative to discuss use for exterior applications. • If Solar Reflective colors are used for a heat sensitive substrate then only the Mono White and Clear can be used in the formula.

Thoroughly review product label for safety and cautions prior to using this product. A Material Safety Data Sheet is available from your local Sherwin-Williams facility. Please direct any questions or comments to your local Sherwin-Williams facility. Catalyst CONTAINS ISOCYANATES. People who have chronic (long-term) lung or breathing problems or have had a reaction to isocyanates must not be in the area where this product is being applied. Where overspray is present, a positive pressure air-supplied respirator should be worn. If unavailable, a properly fitted organic vapor/particulate respirator may be effective. Consult catalyst MSDS and product label for complete handling instructions. Note: Product Data Sheets are periodically updated to reflect new information relating to the product. It is important that the customer obtain the most recent Product Data Sheet for the product being used. The information, rating, and opinions stated here pertain to the material currently offered and represent the results of tests believed to be reliable. However, due to variations in customer handling and methods of application, which are not known or under our control, The Sherwin- Williams Company cannot make any warranties as to the end result. Building Product Lab/Columbus S Richter 7/2018